Darkside 1.9 & 2.0 8v PD105 BLS / BRM & BMP / BMM EGR Delete / Race Pipe

Darkside 1.9 & 2.0 8v PD105 BLS / BRM & BMP / BMM EGR Delete / Race Pipe

Darkside EGR and Cooler Delete Kit for 1.9 & 2.0 8v PD105 BLS & PD140 BRM & BMP / BMM Diesel Engines Our kit replaces the EGR Valve / Cooler and fits neatly between the Anti Shudder Valve and Inlet Manifold. Retaining the ASV means the engine still remains smooth when switching off the ignition. The Darkside EGR Delete Race Pipe is machined from a Single Billet so there are no welds. This improves appearance and also strength. We have found that kits from other suppliers crack due to the strain of the boost pipework hanging from the ASV, therefore we designed our part to overcome this problem We use a unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost guage from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install. As our design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used Please Note: This kit will only fit engines fitted with the 3 peice EGR Valve (See photo 3). Double check if your vehicle as a 2 or 3 peice EGR Valve before purchasing

Reduces inlet air temperatures = more power

Prevents further carbon buildup in the inlet and turrbo

Available in a brushed Aluminium or Anodised Black finish

Designed and manufactured in the UK

This Kit Consists of the following:

1x CNC Machined EGR Delete Race Pipe
1x Nitrile O-Ring
1x Turbo EGR Blanking Plate with Gasket
1x Long Vented Grub Screw (for boost gauge takeoff)
1x Short Grub Screw (to block boost port)
6x EGR Delete Bolts
2x M8 Nuts (For EGR Port)
1x 90 Degree Plastic Joiner with clamps

Please see our blog on EGR Valves and Removals here:

https://www.darksidedevelopments.co.uk/egr-removal-delete/

Darkside 2.5" Stainless DPF Delete Downpipe for 1.9 8v TDi BLS & BRM & 2.0 8v TDi BMP / BMM:

https://www.darksidedevelopments.co.uk/products/darkside-2-5-stainless-dpf-delete-downpipe-for-1-9-8v-tdi-bls-brm-2-0-8v-tdi-bmp-bmm.html

This Kit will fit Vehicles with the following Engine Codes:

Audi A3 / S3 - BLS (105) BMM (140)

Audi A3 Cabriolet - BLS (105)

Seat Cordoba / Vario - BMS (80) BMT (100)

Seat Ibiza - BMS (80) BXJ (90) BMT (100) BLS (105)

Skoda Fabia - BMS (80) BLS (105)

Skoda Octavia - BLS (105) BMM (140)

Skoda Roomster - BMS (80) BLS (105)

Skoda Routan - BMS (80) BLS (105)

Skoda Superb - BLS (105) BMP (140)

VW Bora - BRM (103)

VW Caddy - BSU (75) BLS (105) BMM (140)

VW Diesel Industrial Motor - CBKA (100)

VW Eos - BMM (140)

VW Golf - BXJ (90) BLS (105) BVB (131) BMM (140)

VW Golf Plus - BXJ (90) BLS (105) BVB (131) BMM (140)

VW Jetta - BRM (103) BLS (105) BMM (140)

VW Passat / Variant - BLS (105) BMP (140)

VW Polo - BWB (70) BMS (80) BMT (100)

VW Touran - BXJ (90) BLS (105) BMM (140)

VW Vento - BRM (103)

Replaces Genuine VAG Part Numbers:

03G131502B - 03G131502 B - 03G 131 502 B
03G131502N - 03G131502 N - 03G 131 502 N
03G131531B - 03G131531 B - 03G 131 531 B
03G129637A - 03G129637 A - 03G 129 637 A

Once the valve is either removed or blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emmisions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.

DARKSIDE DEVELOPMENTS ACCEPTS NO RESPONSIBILITY FOR THE USE OF THIS PART ON THE PUBLIC HIGHWAY WHERE REMOVAL OF EMISSIONS CONTROLS IS PROHIBITED. IT IS THE CUSTOMERS RESPONSIBILITY TO ENSURE THEY COMPLY WITH RULES AND LAWS RELATING TO THEIR HOME COUNTRY

View Full Description Hide Full Description